with No Comments

1. What is the floor support plate and what is the material used?

Floor bearing plate is used in high-rise buildings instead of the original formwork. The material of floor bearing plate refers to the content of zinc plating and yield strength. The common floor bearing plate is Q235 and Q345

2. What are the advantages of floor support plate compared with civil engineering?

Compared with civil engineering, the main advantages of floor bearing plate are fast construction, labor saving, concrete saving, good effect, no maintenance, it is directly used as formwork, and durable. (because the floor support plate can be constructed in multiple layers), it has strong fire resistance, good seismic performance and can be reused.

3. What are the main characteristics of floor bearing plate?

It has the advantages of light weight, high strength, large load-bearing, good seismic resistance, simple and fast construction, convenient assembly, replacing the traditional formwork, optimizing the shortcomings of the traditional formwork, can be used as a part of the structural strength, reduce the material cost, easy to construct reinforcement, wiring and piping, and the appearance is clean and beautiful.

4. Is it OK if the floor bearing plate is not reinforced?

It is more convenient to consider the steel truss floor bearing plate, and it can design the non support slab span with a longer span, so as to reduce or basically do not need temporary support.

5. What kind of floor support plate?

Floor support plate is divided into open type, closed type and steel truss plate.

6. What is the wave height of the floor support plate and what is the wave distance of the floor bearing plate?

Basic parameters of yx73-140-760 floor bearing plate: wave height: 73mm, wave distance: 140mm, effective width: 760mm, unfolded width: 1000mm (thickness specification: 0.8mm, 1.0mm, 1.2mm)

7. Thickness of floor support plate?

The conventional thickness is 0.8mm-1.2mm. The thickness of the bottom plate of the steel bar truss floor support plate is generally 0.5mm.

8. How many studs per square floor support plate?

This should be related to your secondary beam spacing. Normally, it is 2.5 per square meter

9. What is the meaning of “3W” of 3W structural floor bearing plate?

Generally, there are two types of concave convex number of profiled plate: 2W (two convex surfaces) and 3W (three convex surfaces).

10. How large is the reinforcement of floor support plate and how to match it?

This should be determined according to the span size of the floor, slab thickness, concrete strength grade, slab load, etc.

floor support plate